Lock the welder

1972 Dodge Charger

Things are in a state of flux at Efab these days. I am relocating to Los Angeles CA, first seasonally, perhaps permanently. The fate of the Branford, CT shop is uncertain at this time. Without boring everyone with my reasons for moving, let me show you what I will be driving out there: my dream car! Every once in a while I do a car project, and I have a very progressive plan for this one! Ever since I was a kid I looked at the Dodge Charger as the quintessential muscle car. Not based on any particular feature, just the overall design. In particular, the 1971-1974 years. Of course everyone wants the 1968-1970, due mostly to the fact that it has been made famous in so many great movies (bullet, fast and furious, blade, dukes of hazard, etc). I like to be different, and I like the fact that in the later years, the design got a little sleazier.

Of course, I am not going to simply buy a car and drive it stock, its just not me. Also, it doesn't really make sense, environmentally or financially, to drive a car that gets 10 miles per gallon on a regular basis. How can I have my cake and eat it too?

What engine can I put in here that will solve all my problems? I need lots of horsepower and torque, ease of maintenance, decent fuel economy, and low emissions. How about a turbo-diesel?

Modern diesel engines are not what they used to be. They are smooth running, reliable, quiet, have the ability to run a wide variety of fuels (bio-diesels), and make freakish amounts of power.

I am in the process of educating myself on the wide world of diesels now. I have never owned a diesel, or even seen one taken apart. I have a lot to learn before I can make an educated decision on where to begin, but for now I have another task: prep the charger for its cross country drive.

Here she is the day I bought her, coming home from Long Island on the ferry.

charger on ferry

 

As soon as it got to the shop I dove in. Anyone who has ever tried to restore an old car knows the pain I am talking about. Is it safe? what parts are about to fail? Is it going to catch on fire? how is the motor and trans? So many questions, and only one way to find out- start exploring.

One thing that was immediately obvious- the suspension was not up to par. I knew it would have to be upgraded, not only for the trip out west, but also for the heavier engine that will eventually be installed. A phone call to Firmfeel Inc (a mopar suspension specialist) got me several new key components. New heavy duty leaf springs and torsion bars, heavy duty tie rods, rebuilt heavy duty steering box,  giant sway bars,  a full poly bushing kit, and new stiff shocks. Once these components were installed, it completely changed the way the car drove. Thanks Firmfeel!

Next was the engine, and luckily I have a good friend (Ralph at Kehl Tech), who builds race engines for a living, and is dam good at it. He said the motor sounded good (its a small block 360), but suggested we rebuild the carb, which was a good guess because there was a lot of old gas residue gumming it up, as well as many mismatched parts.

Accessory belts were badly misaligned, so some new brackets had to be made as well. The coil was mounted sideways, so that was relocated too.

charger engine without carb

Next step was the wiring. As you can imagine, a lot of morons had been inside this car since it left the factory, and it seemed as if every one of them added their own special touches to the electrical system! My god, butt connectors, wires that had melted, electrical tape, stereo components that didnt work, old fuses, new fuses, wires with no fuse at all, and breakers that randomly pop. With my trusty test light I went at it, and after a week I had removed about 40ft of wire that didnt do anything, repaired several melted wires, got 3 non-functioning gauges to work, installed brighter headlights, and got all the critical running lights working. Of course all of this will get redone again when the new motor transplant happens, but it should survive the trip out now.

I cant be seen driving an orange car, and it isnt the original paint anyway, so a quicky repaint was in order. Spay bomb time!

charger being painted

 

I ripped off the old rotten vinyl roof covering, and molded the pitted metal underneath. I never liked those vinyl roofs anyway. The chromed trim and bumpers were in decent shape, but a scotch brightening session gave them a nice matte finish, similar to stainless steel.

charger in shop

I am leaving next month, so I am driving the car daily to (hopefully) bring any other problems to light before the big push west. Stay tuned for more updates, and remember, not all choppers have 2 wheels!